Let’s get right to our doll tutorial today…..
Here is what you will need.
*fabric for the doll’s skin (face, legs, arms). I used a high-quality muslin but any broadcloth will work.
*fabric for doll body and skirt (I used scraps but you will need about 1/4 yard for each)
*felt for doll hair
*embroidery floss to embellish face (or a fine sharpie will work too)
The first thing you will need to do is to print out the pattern.
Let’s get started, shall we?
Step 1: Trace the legs and arms onto your skin fabric (do not cut….you are going to sew onto these traced lines—it is MUCH easier this way). You can cut out the rest of the doll pieces as shown on the patterns.
Step 2: SEW the lines you have traced, then trim around your sewn lines, leaving 1/8 inch seams.
Step 3: Turn each of the arms and legs and press.
Step 4: Stuff each of the arms and legs. Set aside.
Step 1: Stitch right sides together for the collars. Turn and press. Stitch to one body piece.
Step 2: Stitch the hair to the face front. Embellish face as you would like.
Step 3: Put right sides together of the face and the collared-body piece and stitch.
Step 4: Repeat for felt hair back and back body. You will now have two body pieces with heads.
Step 1: Baste each arm and leg onto doll body front.
Step 2: Your doll front will now look like this.
Step 3: Put arms and legs together onto doll.
Step 4: Put body back onto body front and pin.
Stitch, leaving an opening between dolls legs to flip doll.
Pull doll through your opening.
Stuff up your lovely little lady and sew up the hole.
And you have yourself a cutie patootie doll!!!
I did make a cute skirt to go on her, which is the exact same skirt as The Simple Skirt Tutorial.
The only difference is that the casing is made for 1/4 inch elastic.
Happy Doll Making this week!!! I have about 12 more of these cut out, that Hannie and I are going to be working on. She is so excited….
(Visited 8,703 times, 758 visits today)